 |
» |
|
|
|
 |
Special Note |
|
This course is for the hp indigo press ws2000 and the indigo Omnius WebStream.
|
Course Overview |
The shared support training program is a hands on course. The course focuses on the operation and interaction of the mechanical, electronic, fluid and substrate transport systems on the HP Indigo press. Participants will be taught how to apply maintenance skills to resolve problems. This may include preventative and/or corrective actions, or problem escalation through the Customer Support organization.
Audience
Qualified hp indigo digital press operators who will be required to perform service routines that include preventative maintenance, troubleshooting, and corrective maintenance.
Prerequisites
A person who meets requirements for the Shared Support course has a background of
- Performing preventative and corrective maintenance on complex electromechanical devices.
- Has experience using electronic test equipment.
- Has successfully completed the operator training program for the hp indigo press ws2000.
- Has a minimum of three months experience operating the hp indigo press ws2000.
Benefits
Attendees will be taught techniques to optimize print quality, increase press uptime, and press availability
- Service contract terms tailored to shared support customer
- Access to technical phone support
Objectives
At the completion of this course you will be able to
- Understand of operation and interaction the major subassemblies
- Troubleshoot and repair basic electrical problems.
- Troubleshoot and repair mechanical sub systems.
- Properly observe safety precautions to diagnose problems and perform repairs.
- Be able to perform mandatory preventive maintenance functions at prescribed intervals.
- Perform a system back-up
- Competently maintain the press and minimize service calls
Course outline
Introductions & Demonstrations
- Course Objectives
- Documentation
- Machine Introduction
- Safety & Disposal Procedures
- Introduction to Electrical Properties
- Front Electronics Compartment
- Rear Electronics Compartment
- Identify Replaceable Electronic Boards
Writing Head
- Board Functions
- Writing Head Diagnostics
- Writing Head Adjustment Procedures
Ink System
- Density Calibration
- Conductivity Calibration
- Density Sensor Cleaning
- Ink Tank Replacement
- Dismantle Active Filter
- Ink Valves
- Slit Injectors Adjustments
- Delay and Duration Adjustments
Process
- Squeegee Bias Contact Replacement
- Reverse Rollers Bias Contacts Replacement
- Developer Drum Contact Replacement
- ITM Bias Carbon Brush Replacement
Drums Synchronization and Engagement Adjustments
- Engage - Disengage Adjustment and Synchronization
- Drum Synchronization
- Encoder Calibration
- ITM Sensor Adjustment
Separator
- Disassembling the Separator
- Cleaning the Separator
- Servicing the Separator
- Adjusting Imaging Oil Flow Rates
- Cleaning Station Adjustments
Unwinder
- Removing the Unwinder
- Remove and Reinstall Idler Gear
- Reinstall Unwinder
Indexer
- Removing and Reinstalling Drive Roller
- Adjusting Drive Belt Tension
Web Transport System
- Leveling the Unwinder Dancer
- Adjust Unwinder Pressure Roller
- Adjust Indexer Pressure Roller
- Reattach the Rewinder
- Leveling the Rewinder Dancer
- Image Placement Calibrations
Omnius Control Center (OCC)
- Identify OCC Components
- Testing Unwinder Dancer Sensors
- Testing Rewinder Dancer Sensors
- Testing Unwinder Motor
- Testing Indexer Motor
- Testing Rewinder Motor
Solid Add Compressor
- Adjusting Solid Add Pressure
Computer
- Identify PC Components
- Perform Config.Save
- Perform System Backup
Inline Densitometer
- Remove and Reinstall Inline Densitometer
Troubleshooting
- Schematics Overview
- Mechanical Troubleshooting
Preventative Maintenance
- Monthly PM
- 500k PM
- 1 Million PM
**For prices in Pounds (£) please contact the UK
|
|
|
Printable version
